|
Machining Center
 |
|
|
|
Machining Center:
Features:
1) Used for auto profile 45⪚ and 90⪚ cutting, v-cutting, water slot milling, air pressure balance hole milling and other holes and grooves milling
2) Automatically finishing processing and recognizing for profiles from cutting to milling, and controlled by industrial computer automatization
3) Main components including center control table, auto-conveying device, manipulator, cutting device, milling device, auto-discharging device and scrape conveying device, etc.
4) Many profiles in the auto-conveying table can automatically feed
5) Computerized manipulator automatically recognizes different profiles and locate
6) Two-axis computerized milling cutters in the milling device can mill various water slots and holes according to different requirements for profiles
45⪚ - 90⪚ angle and V notch would be cut automatically in the cutting device
7) Advanced technique, high automatization, good performance, operating simply and using widely
8) Automatically program and select processing programs
9) Optimizing the processing and making good use of profiles
Parameters:
Input voltage: 3N - 50Hz, 380/220V
Input power: 18k W
Air pressure: 0.6 - 0.8MPa
Air consumption: 200L/min
Processing profile height: 35 - 130mm
Processing profile width: 30 - 120mm
Processing range: 400 - 6,000mm
Overall dimensions: 1,2500 x 3,500 x 2,400mm
Weight: 4,200kg
If this offer has interested you, please, fill the form of inquiry and you receive the answer in ASAP. |
|
|
|
|
Similar Products
|
