Polyester Powder Coatings
|Polyester powder coatings |
1. General Introduction
This type of powder coating is prepared from polyester resin. It can be used in the coating for outdoor products, such as the shell surface coating for outdoor electrical equipments, construction decorating and highway protective fence.
2. Product Series
Products of different gloss are available: High gloss (above 80%), semi gloss (50-80%), flat gloss (20-50%) and no gloss (below 20%). (The gloss can be adjusted according to the customers' demand. )
3. Physical properties of the powder
Density (g/cm 3,25 Centigrade):1.4-1.7
Granularity distribution:100% below 100 micrometre(It can be adapted to the customers' demand)
4. Curing Condition
200 Centigrade (workpiece temperature),10 minutes
5. Average coating rate
8-11m 2/KG, film thickness:70 Micrometre (calculated according to 100% consuming of powder coating)
Packed in double corrugated paper box lined with single polyethylene bag
Available in all RAL codes and customized shades.
Please email us for its more coating performance and detailed spec, catalogues, brochures, shade cards and samples.
Please use contact form for send message directly to seller. Your message will be sent directly to the recipient and will not be publicly displayed.